Fix Epson TX400 Service Required – Waste Counter Reset

Epson TX400 Waste Ink Counter Reset

When the Epson TX400 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson TX400 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson TX400 Stops Printing (Waste Counter Limit)

Most Epson TX400 waste ink counter locks are solved by a software counter reset. Wic Reset Connect Pruža jednostavan postupak.

Kako se pogreška prikazuje

Pisač odbija ispisati čak i kad je tinte dovoljno.
Epson Status Monitor prikazuje upozorenje na održavanje
Treptajuća svjetla i blokirani poslovi
Uređaj je zaključan dok se ne izvrši resetiranje.

Reset Epson TX400 Waste Ink Counter in 3 Steps

Korak 1: Prepare a Windows PC + USB cable and connect Epson TX400 directly. Keep Internet enabled for validation.
Korak 2: Počni Wic Reset Connect in Administrator mode and wait until Epson TX400 appears in the device list.
Korak 3: Umetnite reset-ključ i kliknite Ponovno pokretanje, and after completion power-cycle Epson TX400.

Kupite ključ za resetiranje ⬇️ Preuzmite Wic Reset Connect Upute

Most Epson TX400 waste counter resets finish in ~1–2 minutes.

Često postavljana pitanja

Koliko dugo traje?

Obično oko 1–2 minute.

Što ako resetiranje ne uspije?

Provjerite USB kabel/priključak, pokrenite kao administrator i zatvorite ostale uslužne programe za pisač.

Mogu li resetirati putem Wi-Fi-ja?

Ne. Za resetiranje je potrebna USB veza s računalom s operativnim sustavom Windows.

Trebam li servisni centar?

Obično nije zbog zaključavanja brojača otpadne tinte; obično je dovoljan reset.

Guide prepared for Epson TX400 – Waste Ink Counter Reset using Wic Reset Connect.