Epson BX935FWD Waste Ink Counter Reset

The Epson BX935FWD is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson BX935FWD uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson BX935FWD Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson BX935FWD waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Epson BX935FWD Ink Pad Counter Reset – Quick Steps

1. Étape 1 : Use a Windows PC (7–11) with Internet access. Connect Epson BX935FWD via USB (Wi-Fi reset is not supported).
2. Étape 2 : Open Wic Reset Connect with admin privileges and verify device recognition for Epson BX935FWD.
3. Étape 3 : Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson BX935FWD.

Most Epson BX935FWD waste counter resets finish in ~1–2 minutes.