Model-specific reset guide
Canon MB5160 Ink Absorber Full Reset
The waste ink system in Canon MB5160 collects ink used during cleaning cycles. Once the estimated limit is reached, service mode and a compatible counter reset may be required.
Understanding the Canon MB5160 ink absorber warning
Canon MB5160 uses a stored counter as a maintenance safeguard. Reaching the threshold can produce an Ink Absorber Full, Service Required or related support-code message.
Wic Reset Connect is designed to reset the compatible counter in Canon MB5160. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon MB5160
- Turn the printer off.
- Appuyer et maintenir Stop/Reset.
- Tout en maintenant la touche Stop/Reset, appuyez et maintenez la touche Puissance.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5 fois.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon MB5160
Prepare Canon MB5160 before entering the key. A stable service-mode state and direct USB connection are essential.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon MB5160 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon MB5160 is not detected
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- Connect Canon MB5160 directly to the computer and try another data-capable USB cable or port.
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
Canon MB5160 reset FAQ
Does Canon MB5160 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
Does the reset clean the ink absorber?
No. It resets the stored counter. Inspect, clean or replace the absorber pads when their physical condition requires maintenance.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Restore Canon MB5160
Wic Reset Connect combines a guided reset with support if Canon MB5160 does not respond as expected.