Model-specific reset guide
Epson TX129 Tindijäätmete loenduri lähtestamine
A waste ink counter warning can prevent Epson TX129 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Why the ink pad counter blocks Epson TX129
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson TX129 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson TX129. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson TX129
Correct preparation protects the reset key from being used during a failed communication attempt. Verify each requirement before selecting Reset.
-
Install the original driver
Install the official Epson driver for TX129 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson TX129 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson TX129.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson TX129 is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Install the original Epson driver for TX129; a generic Windows driver may not expose the required communication interface.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
Epson TX129 reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Does Epson TX129 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Restore Epson TX129
Follow the verified sequence for Epson TX129, then restart the printer and continue your work.