Reset Epson NX400 Waste Ink Counter in Minutes

Epson NX400 Waste Ink Counter Reset

If your Epson NX400 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson NX400 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson NX400 Ink Pad Counter Warning?

Koos Wic Reset Connect, you can reset the Epson NX400 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Reset Epson NX400 Waste Ink Counter in 3 Steps

1. samm: Prepare a Windows PC + USB cable and connect Epson NX400 directly. Keep Internet enabled for validation.
2. samm: Avatud Wic Reset Connect with admin privileges and verify device recognition for Epson NX400.
3. samm: Sisestage oma lähtestamisvõti ja vajutage Reset. Wait ~1–2 minutes, then restart Epson NX400.

Osta Reset Key ⬇️ Lae alla Wic Reset Connect Juhised

Most Epson NX400 waste counter resets finish in ~1–2 minutes.

KKK

Kui kaua see võtab aega?

Tavaliselt umbes 1-2 minutit.

Kas ma saan Wi-Fi kaudu lähtestada?

Ei. Lähtestamine nõuab USB-ühendust Windows-arvutiga.

Kas mul on vaja teeninduskeskust?

Tavaliselt ei kasutata tindilugeja lukustust; tavaliselt piisab nullistamisest.

Mis siis, kui lähtestamine ei toimi?

Kontrollige USB-kaablit/porti, käivitage administraatorina ja sulgege muud printeri utiliidid.

Guide prepared for Epson NX400 – Waste Ink Counter Reset using Wic Reset Connect.