Epson NX200 Waste Ink Counter Reset

If your Epson NX200 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson NX200 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson NX200 Stops Printing (Waste Counter Limit)

Teeninduskülastus on sageli mittevajalik. Wic Reset Connect allows a safe Epson NX200 waste counter reset in minutes.

Tavalised sümptomid

• ‘Service Required’ / service life sõnum draiveris või kommunaalprogrammis
• Hooldus-/tugikood (varieerub mudelite/ajurite kaupa)
• Pärast puhastustsükleid peatub printimine
• Hoiatus kordub pärast printeri taaskäivitamist

Three Steps to Restore Epson NX200 Printing

1. 1. samm: Use a Windows PC (7–11) with Internet access. Connect Epson NX200 via USB (Wi-Fi reset is not supported).
2. 2. samm: Start Wic Reset Connect in Administrator mode and wait until Epson NX200 appears in the device list.
3. 3. samm: Use the key to reset the counter, wait for completion, then restart Epson NX200 to finalize.

Most Epson NX200 waste counter resets finish in ~1–2 minutes.

Süsteeminõuded

• Windows 7/8/10/11 PC
• Vajalik USB-ühendus (Wi-Fi lähtestamine ei ole toetatud)
• Stabiilne Interneti-ühendus reseti ajal
• Kehtiv Wic Reset Connect reset key

Ühised parandused

• Proovige teist USB-kaablit (mõned kaablid on ainult laadimiseks).
• Käivitage rakendus administraatorina.
• VPN/proxy ajutiselt välja lülitada, kui valideerimine ebaõnnestub.
• Kasutage otsest USB-ühendust (vältige keskusi).
• Sulgege Epson Status Monitor või muud printeri utiliidid.

Korduma kippuvad küsimused