Reset Epson L5290 Waste Ink Counter in Minutes

Epson L5290 Waste Ink Counter Reset

When the Epson L5290 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L5290 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson L5290 Ink Pad Counter Warning?

Koos Wic Reset Connect, you can reset the Epson L5290 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Kuidas viga ilmneb

Printer keeldub printimast isegi siis, kui tint on saadaval
Epson Status Monitor näitab hooldushoiatust
Vilkuvad tuled ja blokeeritud töökohad
Seade on lukustatud kuni lähtestamiseni

Step-by-Step: Epson L5290 Waste Counter Reset

1. samm: Use a Windows PC (7–11) with Internet access. Connect Epson L5290 via USB (Wi-Fi reset is not supported).
2. samm: Start Wic Reset Connect in Administrator mode and wait until Epson L5290 appears in the device list.
3. samm: Use the key to reset the counter, wait for completion, then restart Epson L5290 to finalize.

Osta Reset Key ⬇️ Lae alla Wic Reset Connect Juhised

Most Epson L5290 waste counter resets finish in ~1–2 minutes.

Enne alustamist

Kehtiv Wic Reset Connect reset key
Windows 7/8/10/11 PC
Vajalik USB-ühendus (Wi-Fi lähtestamine ei ole toetatud)
Stabiilne Interneti-ühendus reseti ajal

KKK

Mis siis, kui lähtestamine ei toimi?

Kontrollige USB-kaablit/porti, käivitage administraatorina ja sulgege muud printeri utiliidid.

Kas mul on vaja teeninduskeskust?

Tavaliselt ei kasutata tindilugeja lukustust; tavaliselt piisab nullistamisest.

Kas ma saan Wi-Fi kaudu lähtestada?

Ei. Lähtestamine nõuab USB-ühendust Windows-arvutiga.

Kui kaua see võtab aega?

Tavaliselt umbes 1-2 minutit.

Guide prepared for Epson L5290 – Waste Ink Counter Reset using Wic Reset Connect.