Model-specific reset guide
Canon IB4120 tindiabsorberi täielik lähtestamine
An absorber warning on Canon IB4120 does not necessarily mean that the printer is mechanically damaged. The software counter and the physical pads must be considered separately.
Understanding the Canon IB4120 ink absorber warning
The lock is based on accumulated maintenance activity. Resetting Canon IB4120 changes the counter value but does not remove ink already held in the absorber material.
Wic Reset Connect is designed to reset the compatible counter in Canon IB4120. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon IB4120
- Turn the printer off.
- Vajutage ja hoidke all Stopp/tagasi seadistamine.
- Hoidke Stop/Reset all, vajutage ja hoidke all Võimsus.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5 korda.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon IB4120
Service mode must be entered correctly before Wic Reset Connect can communicate with the maintenance interface. Resolve other printer errors first.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon IB4120 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon IB4120 is not detected
- Connect Canon IB4120 directly to the computer and try another data-capable USB cable or port.
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
Canon IB4120 reset FAQ
Does Canon IB4120 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
Mitu korda peaksin ma vajutama Stop/Reset?
For Canon IB4120, use 5 Stop/Reset presses in the sequence shown on this page.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Restore Canon IB4120
Use the correct sequence for Canon IB4120 and restore printing without an unnecessary service visit.