Model-specific reset guide
Epson XP-7101 Reset Waste Ink Counter
Epson XP-7101 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.
The counter behind the Epson XP-7101 warning
An ink pad message is a maintenance safeguard. It indicates that Epson XP-7101 has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect is designed to reset the compatible counter in Epson XP-7101. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson XP-7101
Prepare the computer and connection first. Most unsuccessful attempts are caused by a missing original driver, an indirect USB connection or another Epson utility using the printer.
-
Install the original driver
Install the official Epson driver for XP-7101 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson XP-7101 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-7101.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson XP-7101 is not detected
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Install the original Epson driver for XP-7101; a generic Windows driver may not expose the required communication interface.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
Epson XP-7101 reset FAQ
Does Epson XP-7101 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Can I reset Epson XP-7101 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Restore Epson XP-7101
A direct USB connection, the correct driver and a valid key are all you need to reset Epson XP-7101.