دليل إعادة الضبط الخاص بالطراز

Epson XP-7101 Reset Waste Ink Counter

Epson XP-7101 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.

مفتاح إعادة الضبط$8,00
التسليم الفوري عبر البريد الإلكترونييشمل الدعم الفني ما يلي:مفتاح بديل بعد فشل إعادة الضبط
المشكلة

The counter behind the Epson XP-7101 warning

An ink pad message is a maintenance safeguard. It indicates that Epson XP-7101 has reached a stored waste ink value that must be reset before normal printing can resume.

صُمم Wic Reset Connect لإعادة ضبط العداد المتوافق في Epson XP-7101. يجب مع ذلك فحص نظام الحبر المهدور الفعلي وصيانته عند الضرورة.

Windows 7–11كمبيوتر شخصي أو محمول
USB مباشربدون Wi-Fi أو موزّع
الإنترنتللتحقق من المفتاح
مفتاح إعادة الضبطلهذه العملية
خطوة بخطوة

Reset the counter in Epson XP-7101

جهّز الكمبيوتر والاتصال أولًا. تحدث معظم المحاولات غير الناجحة بسبب فقدان برنامج التشغيل الأصلي، أو الاتصال غير المباشر عبر USB، أو استخدام أداة Epson أخرى للطابعة.

  1. ثبّت برنامج التشغيل الأصلي

    Install the official Epson driver for XP-7101 and confirm that Windows can see the printer.

  2. الاتصال مباشرةً عبر USB

    Connect Epson XP-7101 to the computer without Wi-Fi, a hub or an adapter.

  3. ابدأ تشغيل Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-7101.

  4. أدخل المفتاح وأعد ضبط العداد

    أدخل المفتاح الذي تم شراؤه، واختر Reset، وأبقِ الطابعة متصلة حتى اكتمال العملية.

أكمل بشكل صحيح: After the program confirms completion, close it, turn Epson XP-7101 off for about 10 seconds and switch it on again. The maintenance lock should be cleared.
If Epson XP-7101 is not detected
  • أغلق مراقب الحالة Epson وأي برنامج صيانة آخر من Epson قبل بدء Wic Reset Connect.
  • شغّل Wic Reset Connect كمسؤول وحافظ على اتصال الإنترنت نشطًا طوال عملية التحقق.
  • Install the original Epson driver for XP-7101; a generic Windows driver may not expose the required communication interface.
  • امسح مهام الطباعة المتوقفة مؤقتًا وأعد تشغيل الطابعة وWindows إذا كان برنامج آخر يحتفظ باتصال USB.

فتح التعليمات الكاملة

الأسئلة الشائعة

Epson XP-7101 reset FAQ

Does Epson XP-7101 need service mode?

لا. لا تستخدم طابعات Epson تسلسل وضع الخدمة Canon. صِل الطابعة بشكل طبيعي عبر USB.

Can I reset Epson XP-7101 over Wi-Fi?

لا. يتطلب Wic Reset Connect اتصال USB مباشرًا بالكمبيوتر الذي يعمل بنظام Windows.

ماذا لو فشلت محاولة إعادة الضبط الأولى؟

صحّح مشكلة برنامج التشغيل أو اتصال USB أولًا. إذا تم استهلاك المفتاح، فاستخدم مولّد المفتاح الجديد أو تواصل مع الدعم.

أعد الضبط بثقة

Restore Epson XP-7101

A direct USB connection, the correct driver and a valid key are all you need to reset Epson XP-7101.

مفتاح إعادة الضبط: $8,00
Shopping Cart
اختر عملتك