How to Reset Epson XP-635 Waste Ink Counter

Epson XP-635 Waste Ink Counter Reset

The Epson XP-635 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson XP-635 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson XP-635 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson XP-635 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson XP-635 Ink Pad Counter Reset – Quick Steps

  1. Paso 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-635 via USB (Wi-Fi reset is not supported).
  2. Paso 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-635.
  3. Paso 3: Use the key to reset the counter, wait for completion, then restart Epson XP-635 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrucciones

Most Epson XP-635 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson XP-635 – Waste Ink Counter Reset using Wic Reset Connect.

Carro de la compra