Epson XP-635 Waste Ink Counter Reset
The Epson XP-635 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.
The Epson XP-635 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
What Causes the Epson XP-635 Ink Pad Counter Warning?
مع Wic Reset Connect, you can reset the Epson XP-635 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
العلامات النموذجية
- ترفض الطابعة الطباعة حتى مع توفر الحبر
- تُظهر شاشة مراقبة حالة إبسون تحذير من الصيانة
- الأضواء الوامضة والوظائف المحجوبة
- الجهاز مغلق حتى تتم إعادة الضبط
Epson XP-635 Ink Pad Counter Reset – Quick Steps
- الخطوة 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-635 via USB (Wi-Fi reset is not supported).
- الخطوة 2: مفتوح Wic Reset Connect with admin privileges and verify device recognition for Epson XP-635.
- الخطوة 3: Use the key to reset the counter, wait for completion, then restart Epson XP-635 to finalize.
Most Epson XP-635 waste counter resets finish in ~1–2 minutes.
قبل أن تبدأ
- مفتاح إعادة تعيين مفتاح إعادة تعيين اتصال Wic صالح
- اتصال إنترنت مستقر أثناء إعادة التعيين
- نظام التشغيل ويندوز 7/8/10/11 الكمبيوتر الشخصي
- يلزم الاتصال ب USB (إعادة تعيين Wi-Fi غير مدعوم)
الأسئلة الشائعة
كم من الوقت يستغرق؟
عادةً حوالي 1-2 دقيقة تقريباً.
ماذا لو لم تنجح إعادة التعيين؟
تحقق من كابل/منفذ USB، وقم بتشغيله كمسؤول، وأغلق أدوات الطابعة الأخرى.
هل يمكنني إعادة التعيين عبر شبكة Wi-Fi؟
لا، تتطلب إعادة الضبط اتصال USB بجهاز كمبيوتر يعمل بنظام Windows.
هل أحتاج إلى مركز خدمة؟
عادةً لا يكون ذلك في حالة قفل عداد الحبر المهدر؛ وعادةً ما تكون إعادة الضبط كافية.
Guide prepared for Epson XP-635 – Waste Ink Counter Reset using Wic Reset Connect.