Model-specific reset guide
Nulstilling af tælleren for spildblæk på Epson XP-635
If your Epson XP-635 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Understanding the Epson XP-635 waste ink warning
Epson XP-635 uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.
Wic Reset Connect is designed to reset the compatible counter in Epson XP-635. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson XP-635
The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.
-
Install the original driver
Install the official Epson driver for XP-635 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson XP-635 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-635.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson XP-635 is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Install the original Epson driver for XP-635; a generic Windows driver may not expose the required communication interface.
Epson XP-635 reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Can I reset Epson XP-635 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson XP-635
Ready to restore Epson XP-635? Check the requirements once more and start the guided reset.