Model-specific reset guide
Epson TX235W: Restablecimiento del contador de tinta residual
If your Epson TX235W has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Understanding the Epson TX235W waste ink warning
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson TX235W adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson TX235W. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson TX235W
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for TX235W and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson TX235W to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson TX235W.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson TX235W is not detected
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Install the original Epson driver for TX235W; a generic Windows driver may not expose the required communication interface.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
Epson TX235W reset FAQ
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Does Epson TX235W need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson TX235W
A direct USB connection, the correct driver and a valid key are all you need to reset Epson TX235W.