Epson TX235W Waste Ink Counter Reset

If your Epson TX235W suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson TX235W uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson TX235W Stops Printing (Waste Counter Limit)

Most Epson TX235W waste ink counter locks are solved by a software counter reset. Wic Reset Connect Pruža jednostavan postupak.

Uobičajeni simptomi

• Pisač odbija ispisati čak i kad je tinte dovoljno.
• Epson Status Monitor prikazuje upozorenje na održavanje
• Treptajuća svjetla i blokirani poslovi
• Uređaj je zaključan dok se ne izvrši resetiranje.

Step-by-Step: Epson TX235W Waste Counter Reset

1. Korak 1: Prepare a Windows PC + USB cable and connect Epson TX235W directly. Keep Internet enabled for validation.
2. Korak 2: Otvoreno Wic Reset Connect with admin privileges and verify device recognition for Epson TX235W.
3. Korak 3: Use the key to reset the counter, wait for completion, then restart Epson TX235W to finalize.

Most Epson TX235W waste counter resets finish in ~1–2 minutes.

Što vam je potrebno

• Stabilna internetska veza tijekom resetiranja
• Windows 7/8/10/11 PC
• Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)
• Valjani Wic resetni ključ za povezivanje

Ako se pisač ne detektira

• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).

Često postavljana pitanja