Epson M2128 Waste Ink Counter Reset

When the Epson M2128 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson M2128 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson M2128 Stops Printing (Waste Counter Limit)

Con Wic Reset Connect, you can reset the Epson M2128 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Three Steps to Restore Epson M2128 Printing

1. Paso 1: Use a Windows PC (7–11) with Internet access. Connect Epson M2128 via USB (Wi-Fi reset is not supported).
2. Paso 2: Ejecutar Wic Reset Connect as Administrator and confirm Epson M2128 is detected.
3. Paso 3: Introduzca su clave de reinicio y pulse Restablecer. Wait ~1–2 minutes, then restart Epson M2128.

Most Epson M2128 waste counter resets finish in ~1–2 minutes.

Requisitos del sistema

• Requiere conexión USB (no admite restablecimiento Wi-Fi)
• Conexión a Internet estable durante el reinicio
• Válido Wic Reset Conectar tecla de reinicio
• Windows 7/8/10/11 PC

Si no se detecta la impresora

• Cierre Epson Status Monitor u otras utilidades de la impresora.
• Desactivar temporalmente VPN/proxy si falla la validación.
• Utiliza una conexión USB directa (evita los concentradores).
• Ejecute la aplicación como Administrador.
• Prueba con otro cable USB (algunos cables son de carga).

PREGUNTAS FRECUENTES