Epson M2128 Waste Ink Counter Reset

When the Epson M2128 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson M2128 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson M2128 Stops Printing (Waste Counter Limit)

Dengan Wic Reset Connect, you can reset the Epson M2128 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Three Steps to Restore Epson M2128 Printing

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson M2128 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson M2128 is detected.
3. Langkah 3: Masukkan tombol atur ulang dan tekan Atur ulang. Wait ~1–2 minutes, then restart Epson M2128.

Most Epson M2128 waste counter resets finish in ~1–2 minutes.

Persyaratan Sistem

• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Koneksi Internet stabil selama pengaturan ulang
• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Windows 7/8/10/11 PC

Jika Printer Tidak Terdeteksi

• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Gunakan koneksi USB langsung (hindari hub).
• Jalankan aplikasi sebagai Administrator.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).

PERTANYAAN YANG SERING DIAJUKAN