Epson ET-2751 Waste Ink Counter Reset

When the Epson ET-2751 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2751 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson ET-2751 Show ‘Service Required’?

A menudo no es necesaria una visita de servicio. Wic Reset Connect allows a safe Epson ET-2751 waste counter reset in minutes.

Step-by-Step: Epson ET-2751 Waste Counter Reset

1. Paso 1: Use a Windows PC (7–11) with Internet access. Connect Epson ET-2751 via USB (Wi-Fi reset is not supported).
2. Paso 2: Ejecutar Wic Reset Connect as Administrator and confirm Epson ET-2751 is detected.
3. Paso 3: Introduzca su clave de reinicio y pulse Restablecer. Wait ~1–2 minutes, then restart Epson ET-2751.

Most Epson ET-2751 waste counter resets finish in ~1–2 minutes.

Antes de empezar

• Windows 7/8/10/11 PC
• Requiere conexión USB (no admite restablecimiento Wi-Fi)
• Conexión a Internet estable durante el reinicio
• Válido Wic Reset Conectar tecla de reinicio

Solución de problemas

• Cierre Epson Status Monitor u otras utilidades de la impresora.
• Utiliza una conexión USB directa (evita los concentradores).
• Desactivar temporalmente VPN/proxy si falla la validación.
• Ejecute la aplicación como Administrador.
• Prueba con otro cable USB (algunos cables son de carga).

Preguntas frecuentes