Model-specific reset guide
Canon MG6860 Ink Absorber Full Reset
Canon MG6860 may block print jobs after recording enough cleaning and maintenance cycles. Use the sequence below to enter service mode and reset the stored value.
Understanding the Canon MG6860 ink absorber warning
Waste ink is routed away from the print head and retained inside the printer. The firmware in Canon MG6860 calculates usage and may stop new jobs to reduce overflow risk.
Wic Reset Connect is designed to reset the compatible counter in Canon MG6860. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon MG6860
- Turn the printer off.
- Mantenga pulsado Parar/Restablecer.
- Mientras mantiene pulsado Stop/Reset, pulse y mantenga pulsado Potencia.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 6 veces.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon MG6860
Work through the sequence without rushing. Incorrect button timing or a blinking power light means the printer is not ready for the counter reset.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon MG6860 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon MG6860 is not detected
- Connect Canon MG6860 directly to the computer and try another data-capable USB cable or port.
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
Canon MG6860 reset FAQ
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Does Canon MG6860 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
¿Cuántas veces debo pulsar Stop/Reset?
For Canon MG6860, use 6 Stop/Reset presses in the sequence shown on this page.
Restore Canon MG6860
Follow the verified steps for Canon MG6860, then restart the printer and return to normal operation.