Model-specific reset guide
Epson EP-803AW Reset Waste Ink Counter
Epson EP-803AW may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
Before resetting Epson EP-803AW
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson EP-803AW, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson EP-803AW. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson EP-803AW
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for EP-803AW and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson EP-803AW to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson EP-803AW.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson EP-803AW is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Install the original Epson driver for EP-803AW; a generic Windows driver may not expose the required communication interface.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
Epson EP-803AW reset FAQ
Does Epson EP-803AW need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Restore Epson EP-803AW
Use the model-specific steps above to reset Epson EP-803AW with a stable connection and a valid key.