Canon MG5100 Reset Ink Absorber – Complete Tutorial

Canon MG5100 Ink Absorber Full Reset

When Canon MG5100 triggers an ink absorber full condition, the printer may block printing as a protective measure. The solution is typically a waste ink counter reset.

Ink absorber pads store waste ink during normal operation. Canon firmware tracks this using a software counter and may stop printing when it reaches the limit.

This page is prepared for Canon MG5100. Service mode instructions are shown only when a matching series procedure is known.

How to Enter Service Mode on Canon MG5100

To access maintenance functions, Canon MG5100 may need to be placed in service mode first.

Turn the printer OFF.
Press and hold Stop/Reset.
While holding Stop/Reset, press and hold Power.
Release Stop/Reset (keep holding Power).
Press Stop/Reset 6 times.
Release Power — the printer should enter service mode.

If it doesn’t work, repeat the sequence carefully. The press count depends on the series.

Reset the Ink Absorber Counter

Completing the reset clears the internal ink absorber counter stored in printer memory and restores normal operation.

Important Notes

Treat the reset as a maintenance step. If your printer has extremely high usage, consider cleaning/replacing absorber pads to avoid overflow.

Need a reset solution?

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

For best results, avoid rushing button presses—consistent timing matters.

FAQ

How long does it take?

Usually a few minutes once the correct steps are followed.

Does reset clean the absorber pads?

No. It resets the counter (software). Pads may still require physical maintenance in high-usage cases.

Does every Canon model need service mode?

No. The generator shows service mode steps only when the series procedure is known.

How many times should I press Stop/Reset?

It depends on the series. Many use 5 presses; PRO/imagePROGRAF/MG use 6 in this generator.

Guide prepared for Canon MG5100 – Ink Absorber / Waste Ink Counter Reset using Wic Reset Connect.