How to Reset Epson L3114 Waste Ink Counter

Epson L3114 Waste Ink Counter Reset

The Epson L3114 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3114 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson L3114 Ink Pad Counter Warning?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson L3114 waste counter reset in minutes.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Reset Epson L3114 Waste Ink Counter in 3 Steps

  1. Βήμα 1: Connect Epson L3114 to a Windows computer with a stable Internet connection using a USB cable.
  2. Βήμα 2: Run Wic Reset Connect as Administrator and confirm Epson L3114 is detected.
  3. Βήμα 3: Use the key to reset the counter, wait for completion, then restart Epson L3114 to finalize.
Buy Reset Key ⬇️ Λήψη Wic Reset Connect Οδηγίες

Most Epson L3114 waste counter resets finish in ~1–2 minutes.

Common Fixes

  • Temporarily disable VPN/proxy if validation fails.
  • Close Epson Status Monitor or other printer utilities.
  • Run the app as Administrator.
  • Use a direct USB connection (avoid hubs).
  • Restart printer and PC, then try again.

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson L3114 – Waste Ink Counter Reset using Wic Reset Connect.

Καλάθι Αγορών