Epson BX300F Waste Ink Counter Reset

If your Epson BX300F suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson BX300F uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson BX300F Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson BX300F waste counter reset in minutes.

Common Symptoms

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Epson BX300F Ink Pad Counter Reset – Quick Steps

Βήμα 1: Use a Windows PC (7–11) with Internet access. Connect Epson BX300F via USB (Wi-Fi reset is not supported).
Βήμα 2: Run Wic Reset Connect as Administrator and confirm Epson BX300F is detected.
Βήμα 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson BX300F.

Buy Reset Key ⬇️ Λήψη Wic Reset Connect Οδηγίες

Most Epson BX300F waste counter resets finish in ~1–2 minutes.

FAQ

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

How long does it take?

Usually about 1–2 minutes.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson BX300F – Waste Ink Counter Reset using Wic Reset Connect.