Model-specific reset guide
Canon MG3650S Ink Absorber Full Reset
The waste ink system in Canon MG3650S collects ink used during cleaning cycles. Once the estimated limit is reached, service mode and a compatible counter reset may be required.
What stops Canon MG3650S from printing
Waste ink is routed away from the print head and retained inside the printer. The firmware in Canon MG3650S calculates usage and may stop new jobs to reduce overflow risk.
Wic Reset Connect is designed to reset the compatible counter in Canon MG3650S. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon MG3650S
- Turn the printer off.
- Πατήστε παρατεταμένα Διακοπή/Επαναφορά.
- Ενώ κρατάτε πατημένο το Stop/Reset, πατήστε και κρατήστε πατημένο το Ισχύς.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 6 φορές.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon MG3650S
Prepare Canon MG3650S before entering the key. A stable service-mode state and direct USB connection are essential.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon MG3650S to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon MG3650S is not detected
- Connect Canon MG3650S directly to the computer and try another data-capable USB cable or port.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
- If Windows does not detect a service-mode device, restart the printer normally, wait 10 seconds and repeat the preparation.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
Canon MG3650S reset FAQ
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Πόσες φορές πρέπει να πατήσω το Stop/Reset;
For Canon MG3650S, use 6 Stop/Reset presses in the sequence shown on this page.
Does Canon MG3650S require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
Restore Canon MG3650S
Wic Reset Connect combines a guided reset with support if Canon MG3650S does not respond as expected.