Model-specific reset guide
Epson PX660 Reset Waste Ink Counter
Epson PX660 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
The counter behind the Epson PX660 warning
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson PX660, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson PX660. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson PX660
Correct preparation protects the reset key from being used during a failed communication attempt. Verify each requirement before selecting Reset.
-
Install the original driver
Install the official Epson driver for PX660 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson PX660 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson PX660.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson PX660 is not detected
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Install the original Epson driver for PX660; a generic Windows driver may not expose the required communication interface.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
Epson PX660 reset FAQ
Can I reset Epson PX660 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Does Epson PX660 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson PX660
Complete the Epson PX660 counter reset with Wic Reset Connect and assistance whenever you need it.