Epson ET-2405 Ink Pad Counter Reset Guide

Epson ET-2405 Waste Ink Counter Reset

When the Epson ET-2405 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2405 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson ET-2405 Show ‘Service Required’?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson ET-2405 waste counter reset in minutes.

Epson ET-2405 Ink Pad Counter Reset – Quick Steps

  1. Schritt 1: Connect Epson ET-2405 to a Windows computer with a stable Internet connection using a USB cable.
  2. Schritt 2: Run Wic Reset Connect as Administrator and confirm Epson ET-2405 is detected.
  3. Schritt 3: Use the key to reset the counter, wait for completion, then restart Epson ET-2405 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Anweisungen

Most Epson ET-2405 waste counter resets finish in ~1–2 minutes.

What You Need

  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset

Frequently Asked Questions

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson ET-2405 – Waste Ink Counter Reset using Wic Reset Connect.

Warenkorb