Epson ET-2405 Ink Pad Counter Reset Guide

Epson ET-2405 Waste Ink Counter Reset

When the Epson ET-2405 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2405 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson ET-2405 Show ‘Service Required’?

Et servicebesøg er ofte unødvendigt. Wic Reset Connect allows a safe Epson ET-2405 waste counter reset in minutes.

Epson ET-2405 Ink Pad Counter Reset – Quick Steps

Trin 1: Connect Epson ET-2405 to a Windows computer with a stable Internet connection using a USB cable.
Trin 2: Løb Wic Reset Connect as Administrator and confirm Epson ET-2405 is detected.
Trin 3: Use the key to reset the counter, wait for completion, then restart Epson ET-2405 to finalize.

Køb nulstillingsnøgle ⬇️ Download Wic Reset Connect Instruktioner

Most Epson ET-2405 waste counter resets finish in ~1–2 minutes.

Hvad du har brug for

Gyldig Wic-nulstilling Tilslut nulstillingsnøgle
Windows 7/8/10/11 PC
USB-forbindelse påkrævet (Wi-Fi-nulstilling understøttes ikke)
Stabil internetforbindelse under nulstilling

Ofte stillede spørgsmål

Har jeg brug for et servicecenter?

Typisk ikke for en tællelås til spildblæk; en nulstilling er normalt tilstrækkelig.

Hvad hvis nulstilling ikke virker?

Tjek USB-kabel/port, kør som administrator, og luk andre printerværktøjer.

Hvor lang tid tager det?

Normalt omkring 1-2 minutter.

Kan jeg nulstille via Wi-Fi?

Nulstillingen kræver en USB-forbindelse til en Windows-pc.

Guide prepared for Epson ET-2405 – Waste Ink Counter Reset using Wic Reset Connect.