Epson D120 Waste Ink Counter Reset

The Epson D120 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson D120 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson D120 Stops Printing (Waste Counter Limit)

Most Epson D120 waste ink counter locks are solved by a software counter reset. Wic Reset Connect bietet ein unkompliziertes Verfahren.

Häufige Symptome

• ‘Meldung ’Service erforderlich' / Lebensdauer im Treiber oder Dienstprogramm
• Wartungs-/Supportcode (variiert je nach Modell/Treiber)
• Druck stoppt nach Reinigungszyklen
• Die Warnung wird nach einem Neustart des Druckers wiederholt

Reset Epson D120 Waste Ink Counter in 3 Steps

1. Schritt 1: Use a Windows PC (7–11) with Internet access. Connect Epson D120 via USB (Wi-Fi reset is not supported).
2. Schritt 2: Öffnen Sie Wic Reset Connect with admin privileges and verify device recognition for Epson D120.
3. Schritt 3: Geben Sie Ihren Reset-Schlüssel ein und drücken Sie Zurücksetzen. Wait ~1–2 minutes, then restart Epson D120.

Most Epson D120 waste counter resets finish in ~1–2 minutes.