Model-specific reset guide
Epson C110 Reset Waste Ink Counter
When Epson C110 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
Understanding the Epson C110 waste ink warning
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson C110 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect is designed to reset the compatible counter in Epson C110. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson C110
The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.
-
Install the original driver
Install the official Epson driver for C110 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson C110 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson C110.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson C110 is not detected
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Install the original Epson driver for C110; a generic Windows driver may not expose the required communication interface.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
Epson C110 reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Does Epson C110 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Restore Epson C110
Ready to restore Epson C110? Check the requirements once more and start the guided reset.