How to Reset Epson C110 Waste Ink Counter

Epson C110 Waste Ink Counter Reset

The Epson C110 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson C110 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson C110 Stops Printing (Waste Counter Limit)

Most Epson C110 waste ink counter locks are solved by a software counter reset. Wic Reset Connect giver en ligetil procedure.

Three Steps to Restore Epson C110 Printing

Trin 1: Prepare a Windows PC + USB cable and connect Epson C110 directly. Keep Internet enabled for validation.
Trin 2: Start Wic Reset Connect in Administrator mode and wait until Epson C110 appears in the device list.
Trin 3: Indsæt nulstillingsnøglen, klik på Nulstil, and after completion power-cycle Epson C110.

Køb nulstillingsnøgle ⬇️ Download Wic Reset Connect Instruktioner

Most Epson C110 waste counter resets finish in ~1–2 minutes.

Ofte stillede spørgsmål

Hvad hvis nulstilling ikke virker?

Tjek USB-kabel/port, kør som administrator, og luk andre printerværktøjer.

Har jeg brug for et servicecenter?

Typisk ikke for en tællelås til spildblæk; en nulstilling er normalt tilstrækkelig.

Hvor lang tid tager det?

Normalt omkring 1-2 minutter.

Kan jeg nulstille via Wi-Fi?

Nulstillingen kræver en USB-forbindelse til en Windows-pc.

Guide prepared for Epson C110 – Waste Ink Counter Reset using Wic Reset Connect.