How to Reset Epson RX680 Waste Ink Counter

Epson RX680 Waste Ink Counter Reset

The Epson RX680 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson RX680 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson RX680 Ink Pad Counter Warning?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson RX680 waste counter reset in minutes.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson RX680 Printing

  1. Trin 1: Connect Epson RX680 to a Windows computer with a stable Internet connection using a USB cable.
  2. Trin 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson RX680.
  3. Trin 3: Use the key to reset the counter, wait for completion, then restart Epson RX680 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruktioner

Most Epson RX680 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson RX680 – Waste Ink Counter Reset using Wic Reset Connect.

Indkøbskurv