Reset Epson NX400 Waste Ink Counter in Minutes

Epson NX400 Waste Ink Counter Reset

If your Epson NX400 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson NX400 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson NX400 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson NX400 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Reset Epson NX400 Waste Ink Counter in 3 Steps

  1. Стъпка 1: Prepare a Windows PC + USB cable and connect Epson NX400 directly. Keep Internet enabled for validation.
  2. Стъпка 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson NX400.
  3. Стъпка 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson NX400.
Buy Reset Key ⬇️ Download Wic Reset Connect Инструкции

Most Epson NX400 waste counter resets finish in ~1–2 minutes.

FAQ

How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson NX400 – Waste Ink Counter Reset using Wic Reset Connect.

Пазарска количка