Model-specific reset guide
Epson XP-760 Reset Waste Ink Counter
Epson XP-760 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
Understanding the Epson XP-760 waste ink warning
Waste ink produced by cleaning cycles is collected inside the printer. Epson XP-760 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson XP-760. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson XP-760
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for XP-760 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson XP-760 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-760.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson XP-760 is not detected
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
Epson XP-760 reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Can I reset Epson XP-760 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does Epson XP-760 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson XP-760
Follow the verified sequence for Epson XP-760, then restart the printer and continue your work.