Epson XP-760 Waste Ink Counter Reset

The Epson XP-760 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-760 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson XP-760 Ink Pad Counter Warning?

Dengan Wic Reset Connect, you can reset the Epson XP-760 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Gejala Umum

• ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
• Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
• Pencetakan berhenti setelah siklus pembersihan
• Peringatan berulang setelah printer dihidupkan ulang

Three Steps to Restore Epson XP-760 Printing

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-760 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson XP-760 is detected.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson XP-760 to finalize.

Most Epson XP-760 waste counter resets finish in ~1–2 minutes.

Perbaikan Umum

• Jalankan aplikasi sebagai Administrator.
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Gunakan koneksi USB langsung (hindari hub).
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).

Pertanyaan yang Sering Diajukan