دليل إعادة الضبط الخاص بالطراز

Epson NX625 Reset Waste Ink Counter

If your Epson NX625 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.

مفتاح إعادة الضبط$8,00
التسليم الفوري عبر البريد الإلكترونييشمل الدعم الفني ما يلي:مفتاح بديل بعد فشل إعادة الضبط
المشكلة

Why the ink pad counter blocks Epson NX625

Epson NX625 uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.

صُمم Wic Reset Connect لإعادة ضبط العداد المتوافق في Epson NX625. يجب مع ذلك فحص نظام الحبر المهدور الفعلي وصيانته عند الضرورة.

Windows 7–11كمبيوتر شخصي أو محمول
USB مباشربدون Wi-Fi أو موزّع
الإنترنتللتحقق من المفتاح
مفتاح إعادة الضبطلهذه العملية
خطوة بخطوة

Reset the counter in Epson NX625

استخدم التسلسل أدناه لإنشاء اتصال USB مستقر ومسح عداد الحبر المتبقي.

  1. ثبّت برنامج التشغيل الأصلي

    Install the official Epson driver for NX625 and confirm that Windows can see the printer.

  2. الاتصال مباشرةً عبر USB

    Connect Epson NX625 to the computer without Wi-Fi, a hub or an adapter.

  3. ابدأ تشغيل Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson NX625.

  4. أدخل المفتاح وأعد ضبط العداد

    أدخل المفتاح الذي تم شراؤه، واختر Reset، وأبقِ الطابعة متصلة حتى اكتمال العملية.

أكمل بشكل صحيح: Do not disconnect the cable while the reset is running. Restart Epson NX625 only after Wic Reset Connect reports that the operation is complete.
If Epson NX625 is not detected
  • شغّل Wic Reset Connect كمسؤول وحافظ على اتصال الإنترنت نشطًا طوال عملية التحقق.
  • امسح مهام الطباعة المتوقفة مؤقتًا وأعد تشغيل الطابعة وWindows إذا كان برنامج آخر يحتفظ باتصال USB.
  • Install the original Epson driver for NX625; a generic Windows driver may not expose the required communication interface.
  • وصّل الطابعة مباشرةً بالكمبيوتر. لا تستخدم Wi-Fi أو موزّع USB أو محطة إرساء أو خادم طباعة.

فتح التعليمات الكاملة

الأسئلة الشائعة

Epson NX625 reset FAQ

هل تؤدي إعادة الضبط إلى تنظيف وسادات الحبر أو استبدالها؟

لا. فهي تغيّر قيمة العداد المخزّنة. افحص نظام الحبر المهدَر الفعلي ونظّفه أو استبدله عندما تتطلب حالته ذلك.

Can I reset Epson NX625 over Wi-Fi?

لا. يتطلب Wic Reset Connect اتصال USB مباشرًا بالكمبيوتر الذي يعمل بنظام Windows.

Does Epson NX625 need service mode?

لا. لا تستخدم طابعات Epson تسلسل وضع الخدمة Canon. صِل الطابعة بشكل طبيعي عبر USB.

أعد الضبط بثقة

Restore Epson NX625

A direct USB connection, the correct driver and a valid key are all you need to reset Epson NX625.

مفتاح إعادة الضبط: $8,00
Shopping Cart
اختر عملتك