Epson L313 Waste Ink Counter Reset
The Epson L313 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L313 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Why the Epson L313 Stops Printing (Waste Counter Limit)
غالباً ما تكون زيارة الخدمة غير ضرورية. Wic Reset Connect allows a safe Epson L313 waste counter reset in minutes.
العلامات النموذجية
- ‘الخدمة مطلوبة’/ رسالة "مدة الخدمة مطلوبة" في برنامج التشغيل أو الأداة المساعدة
- رمز الصيانة/الدعم (يختلف باختلاف الطراز/سائق)
- تتوقف الطباعة بعد دورات التنظيف
- يتكرر التحذير بعد إعادة تشغيل الطابعة
Three Steps to Restore Epson L313 Printing
- الخطوة 1: Connect Epson L313 to a Windows computer with a stable Internet connection using a USB cable.
- الخطوة 2: مفتوح Wic Reset Connect with admin privileges and verify device recognition for Epson L313.
- الخطوة 3: أدخل مفتاح إعادة الضبط واضغط على إعادة تعيين. Wait ~1–2 minutes, then restart Epson L313.
Most Epson L313 waste counter resets finish in ~1–2 minutes.
إذا لم يتم اكتشاف الطابعة
- استخدم اتصال USB مباشر (تجنب المحاور).
- قم بتشغيل التطبيق كمسؤول.
- جرّب كابل USB آخر (بعض الكابلات للشحن فقط).
- أعد تشغيل الطابعة والكمبيوتر، ثم حاول مرة أخرى.
- تعطيل VPN/الوكيل مؤقتاً إذا فشلت عملية التحقق من الصحة.
الأسئلة الشائعة
هل أحتاج إلى مركز خدمة؟
عادةً لا يكون ذلك في حالة قفل عداد الحبر المهدر؛ وعادةً ما تكون إعادة الضبط كافية.
ماذا لو لم تنجح إعادة التعيين؟
تحقق من كابل/منفذ USB، وقم بتشغيله كمسؤول، وأغلق أدوات الطابعة الأخرى.
كم من الوقت يستغرق؟
عادةً حوالي 1-2 دقيقة تقريباً.
هل يمكنني إعادة التعيين عبر شبكة Wi-Fi؟
لا، تتطلب إعادة الضبط اتصال USB بجهاز كمبيوتر يعمل بنظام Windows.
Guide prepared for Epson L313 – Waste Ink Counter Reset using Wic Reset Connect.