دليل إعادة الضبط الخاص بالطراز

Epson EP-904A Reset Waste Ink Counter

When Epson EP-904A reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.

مفتاح إعادة الضبط$8,00
التسليم الفوري عبر البريد الإلكترونييشمل الدعم الفني ما يلي:مفتاح بديل بعد فشل إعادة الضبط
المشكلة

Understanding the Epson EP-904A waste ink warning

Every cleaning cycle sends a small amount of ink to the waste ink system. Epson EP-904A adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.

صُمم Wic Reset Connect لإعادة ضبط العداد المتوافق في Epson EP-904A. يجب مع ذلك فحص نظام الحبر المهدور الفعلي وصيانته عند الضرورة.

Windows 7–11كمبيوتر شخصي أو محمول
USB مباشربدون Wi-Fi أو موزّع
الإنترنتللتحقق من المفتاح
مفتاح إعادة الضبطلهذه العملية
خطوة بخطوة

Reset the counter in Epson EP-904A

تحمي الاستعدادات الصحيحة مفتاح إعادة الضبط من استخدامه أثناء محاولة اتصال فاشلة. تحقّق من كل متطلب قبل اختيار «إعادة الضبط».

  1. ثبّت برنامج التشغيل الأصلي

    Install the official Epson driver for EP-904A and confirm that Windows can see the printer.

  2. الاتصال مباشرةً عبر USB

    Connect Epson EP-904A to the computer without Wi-Fi, a hub or an adapter.

  3. ابدأ تشغيل Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson EP-904A.

  4. أدخل المفتاح وأعد ضبط العداد

    أدخل المفتاح الذي تم شراؤه، واختر Reset، وأبقِ الطابعة متصلة حتى اكتمال العملية.

أكمل بشكل صحيح: Finish by closing Wic Reset Connect and restarting Epson EP-904A. A short power-off interval lets the printer reload the updated counter value.
If Epson EP-904A is not detected
  • Install the original Epson driver for EP-904A; a generic Windows driver may not expose the required communication interface.
  • أغلق مراقب الحالة Epson وأي برنامج صيانة آخر من Epson قبل بدء Wic Reset Connect.
  • جرّب منفذ USB آخر وكابل USB معروفًا بقدرته على نقل البيانات إذا لم يتم اكتشاف الطابعة.
  • امسح مهام الطباعة المتوقفة مؤقتًا وأعد تشغيل الطابعة وWindows إذا كان برنامج آخر يحتفظ باتصال USB.

فتح التعليمات الكاملة

الأسئلة الشائعة

Epson EP-904A reset FAQ

Can I reset Epson EP-904A over Wi-Fi?

لا. يتطلب Wic Reset Connect اتصال USB مباشرًا بالكمبيوتر الذي يعمل بنظام Windows.

كم تستغرق إعادة الضبط؟

تكتمل إعادة الضبط نفسها عادةً خلال نحو 1–2 دقيقة بعد اكتشاف الطابعة بشكل صحيح.

هل تؤدي إعادة الضبط إلى تنظيف وسادات الحبر أو استبدالها؟

لا. فهي تغيّر قيمة العداد المخزّنة. افحص نظام الحبر المهدَر الفعلي ونظّفه أو استبدله عندما تتطلب حالته ذلك.

أعد الضبط بثقة

Restore Epson EP-904A

Ready to restore Epson EP-904A? Check the requirements once more and start the guided reset.

مفتاح إعادة الضبط: $8,00
Shopping Cart
اختر عملتك