特定型号重置指南
Epson XP-422 Reset Waste Ink Counter
A waste ink counter warning can prevent Epson XP-422 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Understanding the Epson XP-422 waste ink warning
Waste ink produced by cleaning cycles is collected inside the printer. Epson XP-422 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson XP-422. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson XP-422
正确的准备工作可以避免在通信失败时使用重置密钥。选择“重置”前，请确认每项要求。.
-
安装原始驱动程序
Install the official Epson driver for XP-422 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson XP-422 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-422.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson XP-422 is not detected
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- Install the original Epson driver for XP-422; a generic Windows driver may not expose the required communication interface.
Epson XP-422 reset FAQ
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.
Can I reset Epson XP-422 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.