特定型号重置指南
Epson XP-405 Reset Waste Ink Counter
If your Epson XP-405 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Why Epson XP-405 stops printing
Waste ink produced by cleaning cycles is collected inside the printer. Epson XP-405 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson XP-405. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson XP-405
正确的准备工作可以避免在通信失败时使用重置密钥。选择“重置”前，请确认每项要求。.
-
安装原始驱动程序
Install the official Epson driver for XP-405 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson XP-405 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-405.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson XP-405 is not detected
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- Install the original Epson driver for XP-405; a generic Windows driver may not expose the required communication interface.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
Epson XP-405 reset FAQ
Can I reset Epson XP-405 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.