特定型号重置指南
Epson XP-306 Reset Waste Ink Counter
A waste ink counter warning can prevent Epson XP-306 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Why Epson XP-306 stops printing
Waste ink produced by cleaning cycles is collected inside the printer. Epson XP-306 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson XP-306. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson XP-306
重置通常只需几分钟，但在使用密钥之前，必须正确检测到打印机。.
-
安装原始驱动程序
Install the official Epson driver for XP-306 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson XP-306 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-306.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson XP-306 is not detected
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- Install the original Epson driver for XP-306; a generic Windows driver may not expose the required communication interface.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
Epson XP-306 reset FAQ
Can I reset Epson XP-306 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.