特定型号重置指南
Epson XP-221 Reset Waste Ink Counter
A waste ink counter warning can prevent Epson XP-221 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
What the Epson XP-221 service message means
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson XP-221, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect 旨在重置兼容的计数器 Epson XP-221. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson XP-221
按照以下步骤建立稳定的 USB 连接并清除废墨计数器。.
-
安装原始驱动程序
Install the official Epson driver for XP-221 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson XP-221 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-221.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson XP-221 is not detected
- Install the original Epson driver for XP-221; a generic Windows driver may not expose the required communication interface.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
Epson XP-221 reset FAQ
Does Epson XP-221 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.