特定型号重置指南
爱普生 WorkForce 500 重置废墨计数器
If your Epson WorkForce 500 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Why Epson WorkForce 500 stops printing
Waste ink produced by cleaning cycles is collected inside the printer. Epson WorkForce 500 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson WorkForce 500. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson WorkForce 500
正确的准备工作可以避免在通信失败时使用重置密钥。选择“重置”前，请确认每项要求。.
-
安装原始驱动程序
Install the official Epson driver for WorkForce 500 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson WorkForce 500 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WorkForce 500.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson WorkForce 500 is not detected
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
Epson WorkForce 500 reset FAQ
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.
Can I reset Epson WorkForce 500 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.