Epson T1110 Waste Ink Counter Reset

When the Epson T1110 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson T1110 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson T1110 Waste Ink Counter

与 Wic Reset Connect, you can reset the Epson T1110 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Step-by-Step: Epson T1110 Waste Counter Reset

步骤 1： Use a Windows PC (7–11) with Internet access. Connect Epson T1110 via USB (Wi-Fi reset is not supported).
步骤 2： 运行 Wic Reset Connect as Administrator and confirm Epson T1110 is detected.
步骤 3： 输入重置密钥并按重置. Wait ~1–2 minutes, then restart Epson T1110.

购买重置密钥 ⬇️ 下载 Wic 重置连接说明

Most Epson T1110 waste counter resets finish in ~1–2 minutes.

您需要什么

需要 USB 连接（不支持 Wi-Fi 重置）
重置期间稳定的互联网连接
有效 Wic 复位连接复位键
Windows 7/8/10/11 电脑

故障排除

使用直接 USB 连接（避免使用集线器）。.
以管理员身份运行应用程序。.
如果验证失败，则暂时禁用 VPN/代理。.
关闭 Epson 状态监视器或其他打印机实用程序。.
重新启动打印机和电脑，然后再试一次。.

常见问题

我需要服务中心吗？

通常不用于废墨计数器锁；重置通常就足够了。.

可以通过 Wi-Fi 重置吗？

重置需要通过 USB 连接到 Windows PC。.

如果重置不起作用怎么办？

检查 USB 电缆/端口，以管理员身份运行，并关闭其他打印机实用程序。.

需要多长时间？

通常约 1-2 分钟。.

Guide prepared for Epson T1110 – Waste Ink Counter Reset using Wic Reset Connect.