Epson T1110 Waste Ink Counter Reset

When the Epson T1110 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson T1110 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson T1110 Waste Ink Counter

S spletno stranjo Wic Reset Connect, you can reset the Epson T1110 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Step-by-Step: Epson T1110 Waste Counter Reset

1. 1. korak: Use a Windows PC (7–11) with Internet access. Connect Epson T1110 via USB (Wi-Fi reset is not supported).
2. 2. korak: Spustite Wic Reset Connect as Administrator and confirm Epson T1110 is detected.
3. 3. korak: Vnesite ključ za ponastavitev in pritisnite Ponastavitev. Wait ~1–2 minutes, then restart Epson T1110.

Most Epson T1110 waste counter resets finish in ~1–2 minutes.

Kaj potrebujete

• Zahtevana je povezava USB (ponastavitev Wi-Fi ni podprta)
• Stabilna internetna povezava med ponastavitvijo
• Veljavna ponastavitev Wic Povežite tipko za ponastavitev
• Windows 7/8/10/11 PC

Odpravljanje težav

• Uporabite neposredno povezavo USB (izogibajte se vozliščem).
• Aplikacijo zaženite kot skrbnik.
• Začasno onemogočite VPN/proxy, če preverjanje ni uspešno.
• Zaprite Epson Status Monitor ali druge pripomočke za tiskalnik.
• Ponovno zaženite tiskalnik in računalnik ter poskusite znova.

POGOSTA VPRAŠANJA