Epson NX510 Waste Ink Counter Reset
If your Epson NX510 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson NX510 uses a software counter to estimate pad saturation and locks printing at a set threshold.
What Causes the Epson NX510 Ink Pad Counter Warning?
与 Wic Reset Connect, you can reset the Epson NX510 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
典型标志
- 打印机即使有墨水也拒绝打印
- 爱普生状态监视器显示维护警告
- 闪烁的灯光和受阻的工作
- 设备被锁定，直到执行重置
Epson NX510 Ink Pad Counter Reset – Quick Steps
- 步骤 1： Connect Epson NX510 to a Windows computer with a stable Internet connection using a USB cable.
- 步骤 2： 开放 Wic Reset Connect with admin privileges and verify device recognition for Epson NX510.
- 步骤 3： Use the key to reset the counter, wait for completion, then restart Epson NX510 to finalize.
Most Epson NX510 waste counter resets finish in ~1–2 minutes.
系统要求
- Windows 7/8/10/11 电脑
- 重置期间稳定的互联网连接
- 需要 USB 连接（不支持 Wi-Fi 重置）
- 有效 Wic 复位连接复位键
如果检测不到打印机
- 如果验证失败，则暂时禁用 VPN/代理。.
- 使用直接 USB 连接（避免使用集线器）。.
- 试试另一条 USB 电缆（有些电缆只能充电）。.
- 重新启动打印机和电脑，然后再试一次。.
- 关闭 Epson 状态监视器或其他打印机实用程序。.
常见问题
需要多长时间？
通常约 1-2 分钟。.
我需要服务中心吗？
通常不用于废墨计数器锁；重置通常就足够了。.
可以通过 Wi-Fi 重置吗？
重置需要通过 USB 连接到 Windows PC。.
如果重置不起作用怎么办？
检查 USB 电缆/端口，以管理员身份运行，并关闭其他打印机实用程序。.
Guide prepared for Epson NX510 – Waste Ink Counter Reset using Wic Reset Connect.