特定型号重置指南
Epson ME-400 Reset Waste Ink Counter
Epson ME-400 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
Understanding the Epson ME-400 waste ink warning
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson ME-400 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson ME-400. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson ME-400
按照以下步骤建立稳定的 USB 连接并清除废墨计数器。.
-
安装原始驱动程序
Install the official Epson driver for ME-400 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson ME-400 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ME-400.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson ME-400 is not detected
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
- Install the original Epson driver for ME-400; a generic Windows driver may not expose the required communication interface.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
Epson ME-400 reset FAQ
Does Epson ME-400 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.