Epson ME-350 Waste Ink Counter Reset

The Epson ME-350 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson ME-350 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson ME-350 Ink Pad Counter Warning?

与 Wic Reset Connect, you can reset the Epson ME-350 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

错误如何出现

• ‘驱动程序或实用程序中的 ’需要服务"/使用寿命信息
• 维护/支持代码（因型号/驱动程序而异）
• 清洁循环后停止打印
• 重新启动打印机后，警告重复出现

Three Steps to Restore Epson ME-350 Printing

1. 步骤 1： Use a Windows PC (7–11) with Internet access. Connect Epson ME-350 via USB (Wi-Fi reset is not supported).
2. 步骤 2： 运行 Wic Reset Connect as Administrator and confirm Epson ME-350 is detected.
3. 步骤 3： 输入重置密钥并按 重置. Wait ~1–2 minutes, then restart Epson ME-350.

Most Epson ME-350 waste counter resets finish in ~1–2 minutes.

系统要求

• 需要 USB 连接（不支持 Wi-Fi 重置）
• 重置期间稳定的互联网连接
• 有效 Wic 复位连接复位键
• Windows 7/8/10/11 电脑

如果检测不到打印机

• 关闭 Epson 状态监视器或其他打印机实用程序。.
• 使用直接 USB 连接（避免使用集线器）。.
• 重新启动打印机和电脑，然后再试一次。.
• 如果验证失败，则暂时禁用 VPN/代理。.
• 试试另一条 USB 电缆（有些电缆只能充电）。.

常见问题