特定型号重置指南
Epson L3278 Reset Waste Ink Counter
When Epson L3278 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
Before resetting Epson L3278
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson L3278, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect 旨在重置兼容的计数器 Epson L3278. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson L3278
先完成以下连接检查，然后运行重置程序；在此过程中不要打开其他打印机程序。.
-
安装原始驱动程序
Install the official Epson driver for L3278 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson L3278 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L3278.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson L3278 is not detected
- Install the original Epson driver for L3278; a generic Windows driver may not expose the required communication interface.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
Epson L3278 reset FAQ
Can I reset Epson L3278 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
Does Epson L3278 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.