Model-specific reset guide

Epson L3152 Reset Waste Ink Counter

Epson L3152 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.

重置键$8,00
Instant email delivery包含技术支持Replacement key after a failed reset
The problem

What the Epson L3152 service message means

An ink pad message is a maintenance safeguard. It indicates that Epson L3152 has reached a stored waste ink value that must be reset before normal printing can resume.

Wic Reset Connect is designed to reset the compatible counter in Epson L3152. The physical waste ink system should still be inspected and maintained when necessary.

Windows 7–11PC or laptop
Direct USBNo Wi-Fi or hub
InternetFor key validation
重置键For this operation
Step by step

Reset the counter in Epson L3152

Prepare the computer and connection first. Most unsuccessful attempts are caused by a missing original driver, an indirect USB connection or another Epson utility using the printer.

  1. Install the original driver

    Install the official Epson driver for L3152 and confirm that Windows can see the printer.

  2. Connect directly by USB

    Connect Epson L3152 to the computer without Wi-Fi, a hub or an adapter.

  3. Start Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L3152.

  4. Enter the key and reset

    Enter the purchased key, choose Reset and keep the printer connected until completion.

Finish correctly: A successful reset is finalized by switching Epson L3152 off and on. The printer should then accept jobs normally.
If Epson L3152 is not detected
  • Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
  • Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
  • Install the original Epson driver for L3152; a generic Windows driver may not expose the required communication interface.
  • Try another USB port and a known data-capable USB cable if the printer is not detected.

Open full instructions

Common questions

Epson L3152 reset FAQ

Can I reset Epson L3152 over Wi-Fi?

No. Wic Reset Connect requires a direct USB connection to the Windows computer.

What if the first reset attempt fails?

Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.

Does Epson L3152 need service mode?

No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.

Reset with confidence

Restore Epson L3152

Complete the Epson L3152 counter reset with Wic Reset Connect and assistance whenever you need it.

Reset key: $8,00
购物车
选择货币