特定型号重置指南
Epson ET-2813 Reset Waste Ink Counter
If your Epson ET-2813 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Before resetting Epson ET-2813
Waste ink produced by cleaning cycles is collected inside the printer. Epson ET-2813 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson ET-2813. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson ET-2813
先准备好电脑和连接。大多数尝试失败是由于缺少原始驱动程序、使用了间接 USB 连接，或其他 Epson 实用程序正在使用打印机。.
-
安装原始驱动程序
Install the official Epson driver for ET-2813 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson ET-2813 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-2813.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson ET-2813 is not detected
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- Install the original Epson driver for ET-2813; a generic Windows driver may not expose the required communication interface.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
Epson ET-2813 reset FAQ
Can I reset Epson ET-2813 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.
Does Epson ET-2813 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.